fuji clearview 1m cr

Fuji Clearview 1M CR

ClearView-CS and ClearView-1m For premium image quality, Fujifilm offers our exclusive dual side reading technology in both the ClearView-CS and the ClearView-1.

Fuji Clearview 1M CR

ClearView-CS and ClearView-1m For premium image quality, Fujifilm offers our exclusive dual side reading technology in both the ClearView-CS and the ClearView-1. ClearView systems feature higher DQE and clearer images with less noise. These advanced imaging systems also offer higher spatial resolution for better visualization of fine details. Also standard single side reading for routine general radiographic examinations is supported. 30-40% higher DQE over standard single side scanning 50 micron scanning for higher spatial resolution Potential dose reduction Ideal for pediatrics, extremity work - anywhere that seeing the details matters!
fuji clearview 1m cr

Fuji Clearview 1M CR gives you the following benefits:


The ClearView-1m is designed for lower-volume environments or for in-room installations where high throughput is needed. Yet it still delivers images with the same exceptional high quality as the ClearView-CSm, thanks to Fuji's advanced imaging techniques and 50-micron pixel sampling.

 

The ClearView-1m features:


A high-speed CR reader. The ClearView-1m employs a single imaging plate (IP) cassette driver that's capable of reading standard x-ray IPs in sizes up to 14x17 inches, or images acquired on both 18 x 24cm and 24 x 30cm-sized high resolution HR-BD IPs. The ergonomically-designed single plate unit, together with Fuji's unique high-speed IP reading technology, will provide a throughput of up to 45 IPs per hour.


Dual side reading with 50-micron sampling. The ClearView-1m's dual side reading feature permits captured x-ray information to be read from both sides of the imaging plate (IP) simultaneously. Detective quantum efficiency (DQE) is increased by 100% over standard IPs, resulting in a 50% reduction in noise. And the 50-micron sampling provides spatial resolution of 20 pixels/mm (near 10 lp/mm), delivering clear, crisp images, which are crucial for accurate diagnosis.


Versatile multi-modality capability. Along with high resolution HR-BD IPs, the ClearView-1m also reads standard IPs for general radiographic procedures. This multi-modality feature makes the unit versatile because it's suitable for digital radiographic applications beyond those for mammography. It can be particularly valuable in an imaging center where a single CR reader can be used to produce high definition digital mammography and general radiographic digital images.


An IIPm technologist console with PEM. The IIPm console is an integrated patient ID, image QA review and reprocessing workstation. It provides image processing, image transmission and advanced QA tools for detailed image enhancement and adjustments suitable for the image quality requirements of mammography. Advanced image processing techniques include:


  • Dynamic Range Control (DRC) improves the visibility of both dense and soft tissue by amplifying or reducing image density and contrast
  • Multi-objective Frequency Processing (MFP) selectively applies varying degrees of edge enhancement processing to each individual structure dependent on size for improved image quality
  • Pattern Enhancement for Mammography (PEM) detects and improves the conspicuity of minute structural information within the breast through pattern recognition. This makes it easier to view foreign objects such as micro-calcifications.

The IIPm's Database Sharing option enables centralized image review or access to images from any clustered IIPm location.

The Fuji Clearview 1M CR provides you with with the following Specification:


Throughput
Dual-Side (50 micron)
24x30 cm (HR-BD)* 40 IPs/hr
18x24 cm (HR-BD)* 45 IPs/hr
24x30 cm (ST-BD)+ 42 IPs/hr
18x24 cm (ST-BD)+ 48 IPs/hr
HQ (100 micron)
14” x 17” (35x43 cm) 60 IPs/hr
14” x 14” (35x35 cm) 66 IPs/hr
10” x 12” 72 IPs/hr
8” x 10” 90 IPs/hr
24x30 cm (ST) 70 IPs/hr
18x24 cm (ST) 85 IPs/hr
24x30 cm (HR) 55 IPs/hr
18x24 cm (HR) 65 IPs/hr

* Mammography
+ Pediatrics

Cycle Time
Approx. 40-65 seconds (HQ)
75-90 seconds (Dual-Side)

Imaging Plates
ST-VI, HR-V, ST-BD (Pediatrics), HR-BD (Mammography)

Cassettes
Type C, CM, DM Long View, Type P

Network Connection
DICOM/FIN-P/ Network connection via 100 Base-T/10 Base-TX

External Dimensions
W25.8” x D29” x H52”
W655 x D740 x H1330 (mm)

Flash IIP Plus Console Minimum Specifications for Mammography
CPU Pentium 4, 3.2 MHz
Memory 1GB
HDD 80 GB
Monitor 2 MP LCD

Weight
529 lbs (240KG)

Power Requirements
110V, 7A (Max)

RELATED PRODUCTS

CR 850



View Details

CR 75.0



View Details

Prima T2



View Details