Quick answer: The Oakworks CFPM400 is a four motion C-Arm imaging table offering height, longitudinal float, lateral float and Trendelenburg tilt. Oakworks describes it as the most cost-effective four motion table on the market. It carries a 500 lb patient weight capacity, a 22 by 84 inch carbon fibre top and a four year frame warranty. Amber Diagnostics is an authorised Oakworks dealer.
Oakworks CFPM400 4 Motion C-Arm Table Overview
Four motion tables give you complete positioning control without moving the patient. Height handles transfer and imaging elevation, longitudinal and lateral float move anatomy through the imaging field, and Trendelenburg tilt covers vascular studies and contrast management. For full surgical and vascular work, that combination is what lets you reach a projection mid-case on a draped patient.
The CFPM400 uses a dynamic height range of 26 to 44 inches, which accommodates low wheelchair transfers at one end and full lateral C-Arm imaging at the other. It sits on a low profile base with independently locking casters.
Key Specifications
| Specification | Detail |
|---|---|
| Motions | 4: height, longitudinal float, lateral float, Trendelenburg tilt |
| Height range | 26″ to 44″ |
| Tabletop | 22″ x 84″ carbon fibre |
| Metal-free imaging space | 56 in. with integrated headrest, 52 in. with rectangular top |
| Patient weight capacity | 500 lbs (227 kg) |
| Certifications | FDA listed, cETL approved, CE marked |
| Warranty | 4 years on frame, understructure, upholstery and padding |
Who the CFPM400 Is For
Surgical and vascular suites where you cannot reposition a draped patient mid-procedure. If your case mix includes contrast studies or anything requiring Trendelenburg, four motion is not optional.
Pain management practices doing a broad range of procedures also benefit, though many are well served by a three motion CFPM300 at lower cost. Buy the motions your procedures require rather than the highest count available.
Tabletop Options
| Integrated headrest | Rectangular top | |
|---|---|---|
| Metal-free imaging space | 56 inches | 52 inches |
| Head support | Contoured integrated headrest | Flat rectangular surface |
| Best for | Prone spine work, maximum cranial imaging reach | General fluoroscopy and urology |
Refurbishment and Support
As an authorised Oakworks dealer we supply the CFPM400 new with full factory warranty, and refurbished when units come available through our buying network. Refurbished imaging tables are less common than C-Arms because they tend to stay in service a long time, so tell us your timeline and we will advise on availability honestly.
We support you from site planning through shipping, installation and technical servicing. Warranties and financing are available on every system we sell. Keep your costs down and imaging capabilities high with Amber Diagnostics.
Frequently Asked Questions
What do the four motions on a C-Arm table actually do?
Height raises and lowers the top for patient transfer and imaging elevation. Longitudinal float slides the top head to foot, moving anatomy through the imaging field. Lateral float slides it side to side for centring and oblique approaches. Trendelenburg tilts the table head down or up, which is required for vascular studies and contrast management.
Will the CFPM400 work with my C-Arm?
In most cases yes, but confirm before ordering. Compatibility depends on your C-Arm base design, arc depth and the table base geometry, which together determine whether you can reach the projections you need. Tell us your C-Arm model and detector size and we will confirm compatibility. It is a short conversation that prevents an expensive mistake.
Should I choose the integrated headrest or the rectangular top?
The integrated headrest gives 56 inches of metal-free imaging space and a contoured head support, which suits prone spine work and anything needing maximum cranial reach. The rectangular top gives 52 inches with a flat surface, better for general fluoroscopy and urology. If you do cervical or upper thoracic spine work, take the integrated headrest.
Request Pricing on a Refurbished CFPM400
Tell us your procedure mix, your budget and your room, and we will tell you honestly whether the CFPM400 is the right fit. Call +1 888-561-7900 or 407-438-7847.