How to Estimate Patient Throughput for a Mobile MRI
Last updated September 28, 2026. Amber Diagnostics.
A mobile MRI does not have one fixed patient count. You estimate scans per day from your exam mix, your staffed hours, and the full room time per patient.
UC Davis Health states that a brain or spine MRI lasts about 45 minutes. The RSNA Daily Bulletin reported 24 scans per day on December 5, 2024, from an 18-year program in Galicia, Spain. That figure is not an Amber USA capacity claim.
Staffed minutes per day divided by average room time per exam equals scheduled scans per day. Then apply your own no-show rate.
Room time is the full patient path, not the scan clock alone. Your RIS times are the best input. Published exam lengths are a stand-in until you have those times.
Amber USA rents 1.5 T mobile MRI trailers for interim coverage. Pick the bore and the staff plan before you sign. A bigger magnet does not replace a second technologist.
Table of Contents
- How do I choose the right mobile unit for my patient volume?
- What MRI field strengths are available in mobile units, and how do they affect throughput?
- How do I estimate scans per day for a mobile MRI?
- Are mobile units compatible with my PACS and workflow?
- How does Amber USA help you size a mobile MRI?
- Frequently asked questions
- Sources
- SEO Metadata
How do I choose the right mobile unit for my patient volume?
Match the trailer to sustained daily volume, not to one peak day. Under about 10 completed exams, one 1.5 T shift is enough for a routine mix. From 10 to 16, add a second technologist and prefer a 70 cm bore. Above 16, add a second shift before a second trailer.
Pull sustained volume, the backlog, and staffed hours from the last 90 days. If you cannot staff the hours, leave them out. These bands are a planning guide, not a measured Amber USA output.
| Daily completed exams | Field strength | Bore | Staffing | Shift pattern |
|---|---|---|---|---|
| Under 10 | 1.5 T | 60 cm or 70 cm | One technologist | One shift |
| 10 to 16 | 1.5 T | 70 cm when comfort limits completion | Two technologists | One shift |
| Above 16 | 1.5 T | Match the patient mix | Two technologists per shift | Second shift before a second trailer |
A wide bore cuts aborted exams. It does not scan faster by itself. Amber USA quotes mobile MRI rentals by unit and term. Pick the bore before you scope the pad and the power.
What MRI field strengths are available in mobile units, and how do they affect throughput?
Amber USA mobile MRI rentals are 1.5 T. The rental page lists 1.5 T. The rental FAQ states that 3.0 T is not available in a mobile setting because of the wider gauss line. A higher field does not replace staffing.
A September 2026 Amber rental reference lists four 1.5 T mobile systems. GE SIGNA Voyager, Siemens MAGNETOM Aera, and Siemens MAGNETOM Espree have a 70 cm bore. GE Signa HDxt has a 60 cm bore. Ask which unit is free. A 70 cm bore can support patients who cannot tolerate 60 cm. The reference gives a typical wide-bore limit of about 500 lb. The exact rating depends on the model. Make sure that you have the exact table rating before you book those patients.
Amber also sells refurbished 3.0 T systems for fixed rooms. That path is a purchase, not a mobile rental. See the 1.5 T MRI systems page and the 3.0 T MRI systems page. The MRI buyer's guide covers fixed-system costs. It does not set a trailer patient count.
Do not assume an implant is safe at either field. Read the device conditions before you book the slot.
| Item | 1.5 T mobile rental | 3.0 T |
|---|---|---|
| Amber mobile offer | Yes. The rental page lists 1.5 T. | No. The FAQ states 3.0 T is not a mobile option. |
| Fixed systems for sale | Yes | Yes |
| Best fit on a rental | Routine neuro, spine, joint, and body work | Not a mobile rental at Amber |
| What moves scans per day | Staffed hours, room time, bore comfort, and a second technologist | The same levers. Field strength does not replace them. |
Ask for a quote for the unit and the term.
How do I estimate scans per day for a mobile MRI?
Use total room time, not scan time. Staffed minutes per day divided by average room time per exam equals scheduled scans per day. Then apply your no-show rate.
Step 1. Pull your exam mix from the last 90 days. Split it by body part. Mark contrast cases apart from non-contrast cases.
Step 2. Assign a time from your own protocol library. If you do not have trailer times yet, use a published exam length as a temporary stand-in. Replace it after week one.
UC Davis Health states that brain and spine exams last about 45 minutes. Contrast can add up to 15 minutes. Joint exams last 25 to 45 minutes. Johns Hopkins Medicine states that an MRI of the spine or brain can last from 30 minutes to two hours. Measure your own set.
Step 3. Add screening, changing, trailer access, positioning, and coil changes. A lift or a stair is slower than a hallway. Amber trailers include a patient lift, a stair, and a changing room. Time one full path on day one.
Step 4. Build a weighted average. Then divide staffed minutes by that average.
The table below is an illustration, not a facility result. The weighted room time is 44 minutes.
A 10-hour day has 600 staffed minutes. 600 divided by 44 equals 13.6 scheduled exams. An 8-hour day has 480 staffed minutes. 480 divided by 44 equals 10.9 scheduled exams.
Step 5. Apply your own no-show rate. Canada's Drug Agency reported in 2025 that published radiology no-show rates sit between 3 percent and 8 percent. A Canadian imaging survey found rates typically not above 5 percent for CT, MRI, X-ray, and ultrasound. Your rate can sit outside that band.
At a 5 percent no-show rate, the 13.6 scheduled exams leave 12.9 completed exams. The 10.9 scheduled exams leave 10.4 completed exams.
Step 6. Re-run the math for the shift you can staff. A second 8-hour shift, at the same 44 minute room time and a 5 percent no-show rate, is about 20.7 completed exams. That figure is arithmetic, not a measured result. Twenty-four scans per day leaves 20 minutes per patient on an 8-hour day. That pace is a poor default for a parked rental.
| Exam type | Share in this example | Time used | Source of the time | Weighted minutes |
|---|---|---|---|---|
| Brain or spine, no contrast | 40 percent | 45 minutes | UC Davis, about 45 minutes | 18.0 |
| Joint exam | 40 percent | 35 minutes | Midpoint of the UC Davis 25 to 45 minute range | 14.0 |
| Contrast brain | 20 percent | 60 minutes | 45 minutes plus up to 15 minutes for contrast | 12.0 |
| Weighted room time | 100 percent | 44 minutes | Illustration only | 44.0 |
If your fixed-suite times ignore the lift, your estimate is high. Measure one full patient path on day one. Then rerun the division.
Are mobile units compatible with my PACS and workflow?
Yes, when the scanner is DICOM compliant and your IT team finishes setup before the first patient. Amber states that its rental systems are DICOM compliant and connect to an existing PACS, RIS, and worklist. You supply the network connection and an IT contact.
You need a DICOM store destination: AE title, IP address, and port. You need Modality Worklist so the technologist does not type demographics by hand. You need routing rules for the reading list. The DICOM Standard, current edition, Part 4, defines storage and Modality Worklist. NEMA publishes that standard. Ask for the conformance statement. Then match it to your PACS.
Studies that leave your network are electronic protected health information. The HIPAA Security Rule says covered entities must protect that information. HHS publishes Security Rule guidance for the safeguards. Keep a fallback if the primary link drops.
Hand-keyed demographics and failed sends are the common first-week loss. Name the IT contact. Complete a test send. Make sure the worklist returns the right patient. Read one dry-run study from the trailer to the reading worklist.
How does Amber USA help you size a mobile MRI?
Bring your 90-day exam mix to the quote call. Amber USA can match a 1.5 T mobile MRI rental to that mix, the term, and the site. The live rental page shows a patient lift, a stair, a changing room, and dual slide-outs. Those features change access time. They do not set a patient count.
Most customers use their own technologists. The rental rate does not include a technologist. Amber can supply staffing for a separate price, and applications training for a daily fee with two weeks of notice. You still supply a radiologist for supervision.
You supply the pad, power, permits, contrast, and consumables. Typical delivery is two to four weeks after a signed agreement, subject to unit availability. Do not treat that window as a promise if the site is not ready. Service for the scanner is part of the rental. This article does not state an uptime rate.
Talk through your caseload with Amber USA before you choose a configuration. Start on the mobile MRI rental page, or use the contact form. The main line is 407-438-7847.
[IMAGE: Side diagram of the trailer path: lift or stair, changing room, control room, magnet room. No faces or capacity numbers.]
Frequently asked questions
How many patients per day can a mobile MRI scan?
No single number fits every site. Use the formula above and your own no-show rate. The Spain program reported 24 scans per day. Do not book Amber USA capacity from that figure.
Is 3.0 T faster than 1.5 T for a mobile rental?
Amber does not offer 3.0 T as a mobile rental. Its FAQ states that 3.0 T is not available in a mobile setting. Staffed hours and room time still set scans per day.
Does a mobile MRI connect to my PACS?
Yes, when you complete DICOM setup before the first patient. Amber rental systems are DICOM compliant and connect to PACS, RIS, and worklist. You supply the network drop and an IT contact. A test send and a worklist check belong on the pre-arrival list.
How many technologists do I need?
One technologist can run a lower volume on one shift. Two are the practical plan from about 10 completed exams upward. The base rate does not include a technologist.
Can a mobile unit run two shifts?
Yes, if you can staff both shifts. In the 44 minute illustration, two 8-hour shifts produce about 20.7 completed exams at a 5 percent no-show rate. That is arithmetic. Add the lift time before you post that schedule.
Sources
RSNA 2024 Daily Bulletin, December 5, 2024. https://dailybulletin.rsna.org/en/2024/thu/thu03
UC Davis Health Radiology MRI FAQ. https://health.ucdavis.edu/radiology/mymri/mymri-faq.html
Johns Hopkins Medicine, MRI of the spine and brain. https://www.hopkinsmedicine.org/health/treatment-tests-and-therapies/magnetic-resonance-imaging-mri-of-the-spine-and-brain
Canada's Drug Agency, 2025, imaging no-show review. https://www.canjhealthtechnol.ca/index.php/cjht/article/download/CM0034/3181?inline=1
DICOM Standard, current edition, NEMA. https://www.dicomstandard.org/current
HHS Security Rule guidance. https://www.hhs.gov/hipaa/for-professionals/security/guidance/index.html
SEO Metadata
Estimate Scans Per Day for a Mobile MRI
Estimate scans per day for a mobile MRI from your exam mix, staffed hours, and room time. Match the 1.5T unit to that count before you sign a rental contract.