The Del Medical’s single phase X-ray room delivers the ease-of-use, image quality and throughput you expect
Del Medical Single Phase Overview
- 2005
- Single Phase
- Elevating 4 Way Table
- Floor Mounted Tube Stand
- Upright Wall Stand
More Options
Related X-Ray Mahines
What the Overview List Covers, and What It Leaves Open
The five items above describe how this room is built. They do not describe its condition, its image receptor, or what travels with it. Use the table below to turn the list into questions you can put in a quote, and see the rest of the used X-ray rooms for sale if you are still comparing configurations.
| Listed item | What it covers | What to confirm on this room |
|---|---|---|
| 2005 | The model year shown for the configuration | The build date of each component, since a room is assembled from parts that can differ in age |
| Single phase | The generator’s incoming power type | Exact kW rating, kV and mA ranges, and whether your building’s single phase service matches |
| Elevating 4 way table | A table with four-way float and height adjustment | Tabletop travel, patient weight limit, grid ratio, and whether a Bucky and automatic exposure control are fitted |
| Floor mounted tube stand | A tube support that runs on floor rails | Rail length, tube and collimator identity, and the source to image distance range |
| Upright wall stand | A vertical Bucky for chest and standing views | Receptor size accepted, grid, AEC cells, and vertical travel |
The image receptor is the detail that moves the price
The list names mechanical parts and the generator. It does not say how the image is captured. A room of this generation can run on film cassettes, on CR cassettes with a reader, or on a retrofit DR panel. Those three options differ in cost, in workflow, and in what has to be inspected before you accept delivery.
Ask which one this room uses. Then ask for the make, model, and serial number of every reader, panel, and workstation, along with the software licenses that come with them.
Who files the assembly report
When a radiographic room is installed, the assembler who installs certified components has to file a Report of Assembly on Form FDA 2579. Under 21 CFR 1020.30(d)(1), the completed report goes to the purchaser and, where it applies, to the state radiation control agency within 15 days of finishing the assembly.
The same rule defines an assembler broadly enough to include an owner who assembles components into a system that is then used commercially. Decide early who is taking that role on your project and write it into the scope. A few situations are exempt from the report, including a reloaded or replacement tube housing assembly reinstalled into an existing system, and certified accessory components.
Put these in writing before you pay
- Make, model, and serial number for the generator, tube, collimator, table, tube stand, and wall stand
- The receptor workflow, plus every reader, panel, workstation, and license included
- The most recent radiation output, kV accuracy, and image quality results, with the dates they were taken
- Who installs the room and who files the Form FDA 2579 report
Can a room like this be converted to digital?
It depends on three things, and all three are specific to the hardware in front of you. The panel has to fit the table and wall stand Bucky trays. The generator has to support the exposure interface the panel needs. The finished room has to be retested after installation. Ask whether a retrofit is already fitted, quoted as a separate line, or not offered on this room at all. If you are weighing a conversion against a newer system, compare it with other used X-ray machines and with a built-digital room such as the Quantum Q-rad X-ray room.
Ask for a component list on this room
Use the Request Pricing form for this room and ask for three things: a component list with serial numbers, the receptor workflow, and the most recent test records. That link carries the room’s details into the form, so spend your message on what the form cannot know: your site, your timing, and whether you want a digital retrofit quoted. Ask for current availability to be confirmed separately. A listing page shows a configuration, not current stock.





